Caple C851i Instructions d'exploitation télécharger pdf (Page 20)

Operating Instructions

M414462

Reversing Operation

Tumblers with the reversing options are equipped with

a second motor and additional controls to reverse the

direction of the cylinder rotation. This prevents the

tangling of large pieces and minimizes wrinkling.

Reverse Control Switch

A simple “on-off” switch is placed in the control panel

area so the operator can select the reversing or non-

reversing operation. The switch is wired into the

reverse control time circuit so the cylinder will always

turn clockwise (as viewed from the front of the dryer)

when the reverse control switch is actuated for “non-

reversing” operation. If the cylinder is turning in the

wrong direction when the switch is actuated, it will

continue for a few seconds and then start up in the

proper direction.

IMPORTANT: After any electrical maintenance is

done, make sure that the blower motor is turning

clockwise as viewed from the front of the 0350S, 50,

and 75 pound tumblers and counterclockwise on

the 634, 120 and 170 pound tumblers. Then set the

reverse control switch to “non-reversing” and note

that the cylinder turns constantly clockwise as

viewed from the front of the tumbler. If not,

interchange L1 and L2 power leads to the reverse

drive motor.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Pas de commentaire

Caple C851i Instructions d'exploitation Page 20