Caple C891C Spécifications télécharger pdf (Page 5)

6. Focus the lens. (P.21)

7. Slightly depress the shutter release button

and ascertain the correct exposure. (P.22)

8. Frame the subject and release the shutter.

(P.20)

9. Wind the film. (P.22)

10. Rewind the film, which has been

completely exposed. (P.23)

How to Use the Strap

1 ) Undo the stoppers on the strap.

2) Run one end of the strap through the strap eyelet on one side and secure it; repeat the operation for the other

side.

· The strap should be fixed onto the camera in such a way that the mark Konica on the stoppers is visible on

both sides.

Mounting and Dismounting of Lens

To install a lens, align the red dot of the lens with the

lens mount/dismount indicator (red dot) of the

camera body and lightly sink the lens into the camera

body. Hold the lens and turn it clockwise until it

stops with a clicking sound.

To remove the lens, hold the base of the lens and turn it counterclockwise, while the lens interchange button is

kept depressed. Take out the lens when the red dot of the lens comes in line with the lens mount/dismount

indicator of the camera body (red dot).

· When the lens is detached, see to it that dust will not come in the camera and lens barrel and the lens surface

will not be either scratched or marred with fingerprints. Under any circumstances, do not touch the inner parts

of the camera.

1 2 3 4 5 6 7 8 9 10 ... 24 25

Pas de commentaire

Caple C891C Spécifications Page 5