Caple WF1543 Manuel d'instructions télécharger pdf (Page 4)

OPERATING INSTRUCTIONS

The wine cabinet should be placed where the ambient temperature is between 5-35 deg

centigrade (32-95 degrees Fahrenheit). If the ambient temperature is above or below this range,

the performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate and the range of 5-18 ºC (40-65 degrees

Fahrenheit) may not be reached.

• RUN

Indicator light illuminates to signify the cooling mode is currently in operation.

• Light

To control the inner light turn on/off.

• Power

To control this appliance turn on/off (press and hold this button for approximately 3 seconds)

• “Set Upper” Button

To set the temperature of the upper chamber.

• “Set Lower” Button

To set the temperature of the lower chamber.

• “Upper”

Shows the temperature of the upper chamber.

• “Lower”

Shows the temperature of the lower chamber.

Setting the Temperature Control

• Each compartment of the wine cabinet (upper & lower) is independently controlled. To set the

temperature:

Connect the power cord to a properly grounded outlet. In the event of a power interruption, all

previous temperature settings are automatically erased and each compartment will default to a

preset temperature setting of: 7℃ for upper zone and 12℃ for lower zone.

l Set the desired cooling temperature by pressing the buttons adjacent to the “set upper/set

lower” program. Each depression of the buttons will scroll through the available temperature

settings (for each compartment) in increments of 1 degree. The temperature selected will flash in

the LED display for approximately 5 seconds, then revert back to display the temperature of the

internal cabinet

Upper compartment: The temperature setting can be adjusted from 5• to 18•.

Lower compartment: The temperature setting can be adjusted from 5• to 18•.

1 2 3 4 5 6 7 8 9

Pas de commentaire

Caple WF1543 Manuel d'instructions Page 4