Caple CAFF21 Manuel d'utilisateur Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 15
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
STEP 1: Thread two small cable ties through
the small oval holes in the cadence sensor
backing plate on the left side of the unit as
shown in Photo 10. The heads of the cable ties
should be behind the plate.
STEP 2: Thread the cable ties through the
base of the cadence sensor as shown in Photo
11. Pass the ties back underneath the bottom
edge of the backing plate and secure.
Photo 12 shows the installed sensor.
INSTALL THE CRANK SET
Install the left crank arm and the right crank
arm/chain ring assembly. Tighten the nuts se-
curely. Wrap the bike chain around one of the
sprockets. Photo 13.
INSTALL THE MOTOR CHAIN
The motor/gearbox unit drives the crank set us-
ing a 1/4” (6.35mm) drive chain.
STEP 1: Lay the motor chain over the outermost
crank set sprocket and pass it through the gear-
box from the top as shown in Photo 14. You can
reach into the bottom of the gearbox nose and
turn the small sprocket by hand to pull the chain
through the gearbox.
STEP 2: Join the ends of the chain using the included master link. Photo 15A. The master link
consists of a pin assembly, a side plate, and a spring clip. Join the chain ends with the pin
(14) Installing Motor Chain
(13) Installing Crank Set
(15A) Installing Master Link
(clockwise from top left)
(12) Cadence Sensor Installed
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

EXSYS EX-3501 podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Kontrolery urządzeń peryferyjnych EXSYS EX-3501.
Dostarczamy 1 pdf podręczników EXSYS EX-3501 do pobrania za darmo według typów dokumentów: Arkusz Danych


Exsys EX-3501 Arkusz Danych (1 strony)


Marka: Exsys | Kategoria: Peripheral controllers | Rozmiar: 0.22 MB |

  

Spis treści





Więcej produktów i instrukcji dla Kontrolery urządzeń peryferyjnych EXSYS

Modele Rodzaj dokumentu
EX-3403 Arkusz Danych    EXSYS PCI-X 8HDD Serial-ATA 2 Controller (No RAID), 1 strony
EX-3333 Arkusz Danych    EXSYS S-ATA I 2+1 HDD RAID 0/1 PCI Controller, 1 strony
EX-3400 Arkusz Danych    EXSYS PCI-X 4HDD Serial-ATA 2 Controller, RAID 0/1, 1 strony