Caple CR 1200 Manuel d'instructions télécharger pdf (Page 16)

16

Fig. 3.10

Safety hints:

– Before you switch the hob on, make sure

you know which knob controls the

required cooking plate. We advise you

to set the pan over the cooking plate

before switching it on. Remove the pan

after you have switched the cooking

plate off.

– Do not use pots and pans with rough

bases (pay attention to cookware made

of cast-iron). Rough bases can damage

(scratch) the glass surface of the hob.

Make sure that the pan bottom of the

pan is dry and clean.

– Pots with aluminium bottoms may leave

silver streaks or spots on the hob.

– Do not leave wet or damp lids on the

hob.

– The glass-ceramic surface and pans

must be clean. Carefully remove any

food debris (especially containing

sugar), dirt etc. with the aid of a cleans-

ing agent.

– Pan handles should never stand out

beyond the kitchen worktop, as there is

a great danger of knocking the pan

over.

This will also ensure that children

cannot reach them.

– Do not use the hob if the glass sur-

face is broken or cracked in any

way. Please disconnect the hob from

the mains and contact the after-

sales service.

– Do not lean over the cooking plate when

in use.

– Do not lay cooking foil or plastic mate-

rials on the ceramic surface when it is

hot.

– Remember that the surface remains hot

for a long time (about 30 min.) after the

cooking plate has been switched off.

– Follow the cleaning instructions careful-

ly.

Do not use the glass surface for

storage.

Cleaning

Before you begin cleaning make

sure that the appliance is

switched off.

Remove spillages and other types of

incrustations.

Dust or food particles can be removed

with a damp cloth.

If you use a detergent, please make sure

that it is not abrasive or scouring.

Abrasive or scouring powders can dam-

age the glass surface of the hob.

All traces of the cleaner must be

removed with a damp cloth.

Do not put articles on the hob which can

melt: i.e plastic, aluminium foil, sugar,

sugar syrup mixtures etc.

If any of these products items have melt-

ed on the ceramic surface, you should

remove it immediately (when the surface

is still hot) by using a scraper to avoid

any permanent damage to the surface of

the hob.

Avoid using a knife or other sharp

utensils since these can damage the

ceramic.

Do not use steel wool or an abrasive

sponge which could scratch the surface

permanently.

ATTENTION: MOST IMPORTANT!

If cleaning the glass ceramic hob

using a special scraper tool take

extra care to avoid damaging to the

seal at the edges of the glass ceram-

ic surface.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Commentaires sur ces manuels

Pas de commentaire