Caple C 5210 Manuel d'instructions télécharger pdf (Page 13)

How To Use the Hob Burners

Hob burners

Each hob burner is controlled by a sepa-

rate gas tap operated by a control knob

(fig. 4.3) which has 3 positions marked

on the knob, these are:

– Symbol ● : tap closed (burner off)

– Symbol : High (maximum)

– Symbol : Low (minimum)

Push in and turn the knob anti-clockwise

to the selected position.

Low High

Lighting of the hob burners

To ignite the burner, the following instructions are to be pursued:

1) Lightly press and turn the knob anti-clockwise, and make the symbol printed on

the knob to mach with the indicator on the control panel (fig. 4.3).

2) Press the knob to operate the electric ignition; or, in case of power cut, approach a

flame to the burner.

3) Adjust the burner according to the power required.

To turn the burner off, fully rotate the knob clockwise to the off position: ●.

The maximum setting of the control tap is for boiling, the minimum setting is for slow

cooking and simmering.

All working positions must be chosen between the maximum and minimum setting, never

between the maximum setting and the “OFF” position.

Fig. 4.3

Electric ignition

The sparks generated by the electrodes close to the burners will ignite the chosen burn-

er. Whenever the lighting of the burners will result difficult due to peculiar conditions of

the gas features or supply, it is advised to repeat the ignition with the knob on “minimum”

position.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

Caple C 5210 Manuel d'instructions Page 13