Caple C 5210 Manuel d'instructions télécharger pdf (Page 4)

4

Electrical Requirements

N.B. For connection to the mains, do

not use adapters, reducers or

branching devices as they can cause

overheating and burning.

If the installation requires alterations to

the domestic electrical system call an

expert.

He should also check that the socket

cable section is suitable for the power

absorbed by the appliance.

IMPORTANT: The appliance must

be installed in accordance with the

manufacturer’s instructions.

Incorrect installation, for which the

manufacturer accepts no responsi-

bility, may cause damage to per-

sons, animals and things.

General

– Connection to the mains must be

carried out by qualified personnel in

accordance with current regulations.

– The appliance must be connected to

the mains checking that the voltage

corresponds to the value given in the

rating plate and that the electrical

cable sections can withstand the load

specified on the plate.

– The cooker can be connected directly

to the mains placing an omnipolar

switch with minimum opening

between the contacts of 3 mm

between the appliance and the mains.

– The power supply cable must not

touch the hot parts and must be

positioned so that it does not exceed

75°C at any point.

– Once the cooker has been installed,

the switch or socket must always be

accessible.

IMPORTANT: this cooker must be

connected to a suitable double

pole control unit adjacent to the

cooker.

WARNING!

This appliance must be

earthed.

1 2 3 4 5 6 7 8 9 ... 31 32

Commentaires sur ces manuels

Pas de commentaire