Caple CR 1200 Manuel d'instructions télécharger pdf (Page 24)

STAINLESS STEEL SURFACES, ALUMINIUM PARTS AND PAINTED OR

SILK-SCREEN PRINTED SURFACES

Clean using an appropriate product. Always dry thoroughly.

IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra-

sion. You are advised to use a soft cloth and neutral soap.

GLASS CONTROL PANEL

Clean using an appropriate product.

Always dry thoroughly.

Do not use harsh abrasive cleaners or sharp metal scrapers to clean the control panel

since they can scratch the surface, which may result in shattering of the glass.

OVEN FITTING OUT

• Assemble the wire racks to the oven walls using the 2 screws (Fig. 6.1).

• Slide in, on the guides, the shelf and the tray (fig. 6.2).

The shelf must be fitted so that the safety catch, which stops it sliding out, faces

the inside of the oven.

• To dismantle, operate in reverse order.

Fig. 6.2

Fig. 6.1

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Caple CR 1200 Manuel d'instructions Page 24