Caple DOMINO C621 Manuel d'instructions Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 63
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
20
RoomWizard
| SYSTEM MANAGER MANUAL
21
LOTUS DOMINO |
RoomWizard
9 Click the “Browse” button and navigate to the certicate text le
just created.
10 Click “Save on THIS Wizard.
If an error message appears while uploading the certicate le, open
the certicate le and enter two empty paragraphs at the end of the
le. Save the le and upload it again.
11 After the certicate is uploaded, click the Device > Security tab.
12 Select “Enable HTTPS” and click “Save on THIS Wizard.
Wait for the RoomWizard to reboot. This may take a few minutes.
After the RoomWizard has rebooted, enter the RoomWizard’s IP
address in a web browser using the prex https://, for example
https://rw01237.mycompany.com.
NOTE
If your RoomWizard is using HTTPS and you want to switch to HTTP,
deselect “Enable HTTPS” and click “Save on THIS Wizard.” The
RoomWizard will reboot.
Customizing the RoomWizard port for HTTP and HTTPS
1 Telnet to the RoomWizard using an SSH Telnet client.
2 Go to cd data/websign/httpport.conf on the RoomWizard.
3 Specify the port number on which you want RoomWizard to run.
4 Save the le and exit.
5 Reboot the RoomWizard.
NOTE
For https, the conguration le is httpsport.conf under
websign folder.
4 Go to Firmware > Congure SSL and enter the domain name,
company name, division name, city, state, and country.
5 Click the “Generate CSR” button. Wait for the CSR Value to appear
in a text box.
6 Copy the text that appears in the CSR Value text box.
7 Acquire a certicate from a certicate authority on the internet.
This example describes how to obtain a certicate from Thawte,
www.thawte.com.
-
Click the SSL certicate.
-
Fill in the form by entering the same information as you did in the
Firmware > Congure SSL page.
-
Click “Continue.
-
Select “SSL Web Server certicate (All servers)” and move down.
-
Paste the text that you copied from the CSR value text box.
-
Click “Next.
-
Copy the certicate text that is provided and save it as a text le
on your local drive with a .csr or .txt le extension.
8 Return to the Firmware > Congure SSL page.
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 62 63

Commentaires sur ces manuels

Pas de commentaire