Caple C804C Spécifications télécharger pdf (Page 45)

HPOD C-, X-, or Ku-Band High-Power Amplifier MN/HPOD.IOM

Updating Firmware Revision 8

3–9

B. Once the file is selected, the upload will take place

– do not interrupt this upload process.

If the upload is not successful for any

reason (e.g., the comms cable is not

physically connected, the wrong COM

port is specified, the user inadvertently

interrupted the upload, etc.),

troubleshoot the setup as needed, and

then click on ‘Repeat Upload’ or ‘Go

Back to Start’ to resume or retry the

upload process.

5) Upon successful completion of the upload, you may

click on ‘Go Back to Start’ (if, for example, more than

one HPOD requires upgrade) or ‘Close’ (to exit the

FLSHCAT program).

6) Reboot the HPOD.

A. Disconnect the power source from the HPOD.

B. Re-energize the HPOD. The unit will reboot using the updated firmware image.

7) To update and load the other image, repeat steps 1 through 6.

The HPOD is now operating with its latest firmware. The serial-based firmware

update process is now complete.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 149 150

Pas de commentaire

Caple C804C Spécifications Page 45