Caple C871i Manuel d'utilisateur Page 105

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 572
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 104
Apple II Computer Info
#############################################################################
### FILE : dynacomp.pwrfix
#############################################################################
### Created : Tuesday, July 27, 1999 Modified: Tuesday, July 27, 1999
### File Type: "TEXT" File Creator: "LMAN"
### File Size: 1886 bytes 1 KB
#############################################################################
Path:
news1.icaen!news.uiowa.edu!NewsNG.Chicago.Qual.Net!129.79.6.160!news.indiana.edu!l
ogbridge.uoregon.edu!newshub.tc.umn.edu!lynx.unm.edu!capella.unm.edu!buggie
From: [email protected] (stephen e buggie)
Newsgroups: comp.sys.apple2
Subject: Repair of Dead IIgs DynaComp internal power supply!
Date: 26 Jul 1999 19:29:45 GMT
Organization: University of New Mexico, Albuquerque
Lines: 40
Message-ID: <[email protected]>
NNTP-Posting-Host: capella.unm.edu
X-Newsreader: TIN [version 1.2 PL2]
Xref: news1.icaen comp.sys.apple2:150182
I've been transplanting working IIe power supplies into the IIgs internal
casing,m with good results. 14 have been made so far, and they are
called "BUGG-POWER IIGS JR."
Yesterday I succeeded in repairing a dead Dynacomp power supply. In fact,
I have replicated the repair in four units!
There are three patterns of failure in the IIgs DynaComp power supply:
(1) Fuse blows every time -- components look okay.
(2) Fuse is okay, but no voltage on any line. Components look okay.
(3) Volts test okay with no load, but unit quits when attached to
motherboard. Heat scorch marks on power supply circuit board.
This fix applies ONLY to #3, above. It applies only to "early" Dynacomp
power supplies. When inspecting the unit inside, the early versions have
one or fewer tall yellow thin capacitors at the bow-end (10v, 1000 ufd).
(The later versions have the five tall yellows).
To fix the unit, replace two tiny radial electrolytic capacitors:
REPLACE THESE: 1 ufd, 35v
NEW CAPACITORS: 1 ufd, 50v
The new ones are slightly larger than the old. Note the polarity:
The "-" terminal faces the stern (back) of the power supply.
I salvaged the 1 ufd, 50v capacitors from other units that died for other
reasons. But they are available from Jameco for $0.04 in quantities of
100.
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 105 of 572
Vue de la page 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 571 572

Commentaires sur ces manuels

Pas de commentaire