Apple II Computer Info
#############################################################################
### FILE : pctvideo
#############################################################################
### Created : Saturday, November 7, 1998 Modified: Saturday, November 7, 1998
### File Type: "TEXT" File Creator: "LMAN"
### File Size: 2234 bytes 2 KB
#############################################################################
Path:
news1.icaen!news.uiowa.edu!NewsNG.Chicago.Qual.Net!nyd.news.ans.net!newsfeeds.ans.
net!news.idt.net!cpk-news-
hub1.bbnplanet.com!news.news.gtei.net!portc02.blue.aol.com!audrey03.news.aol.com!n
ot-for-mail
Newsgroups: comp.sys.apple2
Subject: Re: Question, PC Transporter...again
Lines: 35
NNTP-Posting-Host: ladder03.news.aol.com
Date: 7 Nov 1998 18:12:53 GMT
Organization: AOL http://www.aol.com
Xref: news1.icaen comp.sys.apple2:141453
>Hey, I was looking at my PCT card again and noticed some things I'd ask
>questions about, since I have no manual and such...besides, everyone's
>been so helpful so far...
>on the rear of the card, there is a 40-pin empty socket...what option or
>upgrade utilized this? an optional z80, or...?
That's for the math co-processor. Just plug in an 8087, boot
the PCT, enter its control panel, configure it to use the 8087,
and you are done.
>next to the keyboard and modulator connections, there is a 5-pin
>connector, what is this for? There is also a 20-pin plug to attach a cable
>of some kind to as well. Which of these is where the ColorSwitch attached?
>(Not that I have one, though I would quite like one) and which is for the
>CGA-out cable? I was under the impression the CGA out would be 2 pins. Or
>am I supposed to attach the CGA out to the pins that are coming out to the
>modulator?
Both CGA and ColorSwitch video connect to J6, the plug
that's on the upper right hand corner of the card.
The ColorSwitch board simply takes the CGA video and
converts it into analog RGB so that it works with the
AppleColor RGB monitor. If you got a CGA monitor,
you can just plug it into this connector (with the right cable).
The two pin connector at J2 is for COMPOSITE VIDEO.
That's the same kind of monitor the IIe uses. This is
probably the best bet...hook up a IIe monitor to the PCT
and you can run the PCT on your IIGS without a
ColorSwitch card.
Apple II Computer Technical Information : Apple II Family Hardware Info
ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 360 of 572
(22 pages)
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels