Caple C871i Manuel d'utilisateur télécharger pdf (Page 359)

100

101

Apple II Computer Info

+ signal from drive to controller

>I'm assuming that the pinout of the PCT 19-pin drive connector is the same

>as

>that of the IIGS SmartPort (that's logical, since Apple 3.5 drives work

>perfectly with the PCT) and that the 5.25 drive comes first in the chain

>(as

>indicated by the PCT manual). So a 19-pin pass-through connector needs to

>be

>added at the rear of the PC drive for chaining the Apple 3.5" drive to. OK.

Hang on, there is no way you are going to be able to connect a PC 360KB drive

to an Apple 19 pin disk port (well, I do have a drive that is a standard

PC style drive with an adapter board that makes it emulate a Disk ][ drive)

and read PC 360KB disks.

Apple 5.25" drives use the 4 step lines to manually step the head in or out.

IBM 5.25" drives hold the Direction line high or low and send a single pulse

on the Step line to move the head in or out. Ditto for IBM 3.5" drives.

Apple 3.5" drives use the 4 step lines to select a comand and another line

to strobe it into the drive (or something like that).

David Wilson School of IT & CS, Uni of Wollongong, Australia [email protected]

###################################################### E N D O F F I L E

### pctdrive.pinout

###################################################### E N D O F F I L E

Apple II Computer Technical Information : Apple II Family Hardware Info

ftp://ground.ecn.uiowa.edu/2/apple2/miscinfo/hardware : May 2001 : 359 of 572

1 2 ... 354 355 356 357 358 359 360 361 362 363 364 ... 571 572

Caple C871i Manuel d'utilisateur Page 359

Commentaires sur ces manuels

Caple C871i Manuel d'utilisateur Page 359

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Caple C871i